Secure Boot Fix Applied: What Happens Next
Running the Secure Boot Fix prepares your system for certificate deployment, but it does not immediately update the system to a compliant state. This page explains what happens next and what to expect.
What the Fix Actually Does
The Secure Boot Fix workflow prepares your system for certificate deployment by enabling required update paths and signaling Windows to apply the new certificate during the update process.
- Enabling certificate deployment via system configuration
- Preparing the system for firmware-level updates
- Triggering Windows Update to begin the process
Why Your System May Still Show Non-Compliant
After applying the fix, your system may still show as non-compliant. This is expected in many cases. The Secure Boot certificate is delivered through Microsoft's update process, which is not immediate and may be deployed in phases.
Expected Timeline
Typical behavior after applying the fix:
- Immediately: System is prepared for certificate deployment
- After reboot: Update process is staged
- Within 24–48 hours: Certificate may be applied by Windows Update
Actual timing may vary depending on system configuration and update availability.
What You Should Do Next
After running the fix:
- Run Windows Update and install all available updates
- Reboot the system
- Allow time for update processing
- Re-run the Secure Boot Check script to verify status
When Further Action Is Required
If your system still shows as non-compliant after 48 hours, additional steps may be required. Common causes include:
- Unsupported CPU upgrade scenarios
- Blocked update paths
- System configuration restrictions
- Incomplete update cycles
Need Help Fixing Non-Compliant Systems?
If systems remain non-compliant, use the Secure Boot Fix Kit for a structured remediation workflow designed for repeatable and controlled deployment ahead of the June 2026 Secure Boot deadline.
Built from real-world enterprise deployment scenarios, including upgrade edge cases and compliance-driven environments.